Chicago Location

T +1-312-600-0777
9212 Cherry Ave
Franklin Park, IL 60131

Houston Location

T +1-800-281-3071
7650 CR 48 unit C
Rosharon, TX 77583

World's Best In the Midwest
[email protected]

For Emergency Service Call:
832-338-4990

1-800-281-3071

MENU

California Pellet Mill Gearbox Repair

When a California Pellet Mill gearbox fails, GearWorld Is here 24/7 for any Emergency situation. We get you up and running fast to Reduce Your Down-Time. GearWorld does not apply a band-aid solution, we diagnose and repair the actual problem to meet or exceed OEM specs.
This case study review of our work was sent to us from a Prominent US powerstation client.
CLICK TO READ THIS CASE STUDY:
California Pellet Mill Industrial Gearbox Reducer Rebuild

Having two ISO certified facilities in Illinois, and one Texas, makes our shops highly accessible and available to your operation. Repairing an existing California Pellet Mill industrial gearbox is a faster and more cost-effective solution than purchasing a new replacement California Pellet Mill gearbox. When it comes to a gearbox repair or rebuild,

Call 1-800-281-3071 “We Make The Impossible Possible”

California Pellet Mill
Give us a call at 1-312-600-0777 to discuss your California Pellet Mill  Gearbox Repair needs with one of our Knowledgeable Experts. Your Service Center for California Pellet Mill  Gearboxes

California Pellet Mill Gearbox Repair

California Pellet Mill

At Gear World, We can complete your California Pellet Mill gearbox repair in far less time and for far less money. We pick up your California Pellet Mill gearbox for free and bring it to one of our plants where we complete an NDTI (Non-Destructive Teardown Inspection) with a full white-glove treatment of your California Pellet Mill gearbox to assess the needs.  

Is your California Pellet Mill Gearbox in need of repair? Contact Gearworld.

 

Call: 1-800-281-3071
For Emergencies Call: 1-832-338-4990
Chicago: 1-312-600-0777

 

Following the rebuild process, GearWorld will begin testing your California Pellet Mill Gearbox. The California Pellet Mill Gearbox is filled with Testing oil made by Royal Purple to start a 4 to 6 hour overheating, vibration, and leaking test. Once your gearbox passes this test run, it is certified and warrantied with our 12-month warranty and is shipped back to you.

GearWorld also offers 24 Hour Emergency Rush Repairs, and as such, we can also Fabricate most Gears in under 24 hours. GearWorld Offers Free Freight and Free Quotes as well as a 12 Month Warranty that goes into effect from the moment you install your California Pellet Mill gearbox.

All engineers and technicians at GearWorld are California Pellet Mill certified and experienced. We maintain an inventory with vital spare parts and technical blueprints of all California Pellet Mill gearbox Models to make sure we can get you back up in as little time as possible.

If your California Pellet Mill gearbox requires repair, GearWorld will get you up and ready to run. When we receive your California Pellet Mill gearbox, we thoroughly clean and perform an NDT your gearbox to find the fault, repair / rebuild components and install them as recommended by OEM Specifications. We Replace all bearings, shims, gaskets, and seals to OEM Specifications.

Gear World has many convenient locations in the USA. We have locations in Chicago, Illinois. This is right in the heart of the midwest. We also have locations in Houston, TX; the epicenter of everything industrial.

 

The Truth About Our California Pellet Mill Gearbox Repair Solutions

When a California Pellet Mill gearbox leaves our plant to go back to work in your process, you are getting a machine that is in“Like-New” condition that will meet and many times exceed the OEM specifications. Check out this case study for more information on how our Amarillo gearbox repair solution surpasses the OEM specs.

Schedule a Tour of One of Our Plants 

Capabilities –  Feel free to call 1-800-281-3071 to schedule a tour of one of our plants. Click here to read more about our Gearbox Repair capabilities. 

 

California Pellet Mill Gearbox History

The origin of CPM can be traced back to California’s Napa Valley, where, in 1883, the Toulouse & Delorieux Co. manufactured presses, crushers and stemmers for winemakers. In 1931, the company created the first pellet mill, the 30 HP Flat Bed with stationary flat die, and we became California Pellet Mill (CPM).

In the years that followed, they created more pellet mill models with additional features. In the 1980s, they greatly expanded their product offerings through the creation of Roskamp Champion with the acquisition of the Roskamp Roller Mill Company and Champion Hammermills.

Disclaimer:

We are not the California Pellet Mill OEM but we do service their products.

2 Great Locations In the MidWest!

With two convenient locations in the heart of the Midwest, near O’Hare Airport, we can pick up your gearbox sooner and offer fast and reliable service. Our friendly open-door policy invites you to visit and see why we’ve been the trusted choice for industrial gearbox repair for over 80 years. Check us out on Google Maps and take a look at our 3D virtual tour of our shop. Schedule an appointment at one of our two locations today and experience the GearWorld difference for yourself.

Our economy is moved by heavy industry. Gearworld Keeps Heavy industry Moving—with complete, California Pellet Mill gearbox repair solutions for the world’s most demanding applications.

Gearbox Repair

EZ AS 1-2-3

GearWorld Makes Getting Your Gearbox Rebuilt Easy. Simply Scan or click the QR code

GearWorld Repair Facility In Chicago, IL